Graphtec America: Cutting Plotters, Vinyl Cutter, InkJet Printers, Wide Format Image Scanners, Data Loggers, Acquistion platforms

Blades and Blade Holders

PHP31-CB09, PHP32-CB09, PHP32-CB09N (Blue tipped)

Blade .9mm

Description of Cut

Materials

CB09UA

Standard blade for cutting adhesive material. Suitable for cutting media up to 10 mil or .25mm thick.

Vinyl, Rubylithe, Reflective

PHP34-CB30-HS (Silver tipped)

Blade 3mm

Description of Cut

Materials

CB30UC-1

3.0mm Supersteel Blade for Thick Materials. Blade extends longer to allow for thicker material cuts.

Spcialty blade for Sandblast Mask, High-intensity Reflective, Carbon Fiber, Mat Board, Printing Press Fabric

PHP31-CB15, PHP32-CB15, PHP32-CB15HS (Red tipped)

Blade 1.5mm

Description of Cut

Materials

CB15U-K30

For cutting sandblast rubber. The sharply angled point provides a longer cutting edge. Suitable for cutting material up to 35 mil.

Sandblast rubber

CB15UA

Designed for cutting High Intensity reflective

High Intensity reflective

CB15UA-K30

For cutting sandblast rubber. The sharply angled point provides a longer cutting edge and the ability to cut harder materials. Suitable for cutting material up to 35 mil.

Sandblast rubber, High Intensity reflective.

CB15-10C

Ceramic

This is the hardest blade, but may chip or shatter if dropped or subjected to impact. Suitable for cutting material up to 25 mil

CB15-05S

Sapphire

For cutting masking media and for intricate cutting

Rubylithe, Amberlithe

PHP31-CB15B (Green Tipped)

Blade 1.5mm

Description of Cut

Materials

CB15B-1

For cutting media which is too thick for the CB09UA blade to handle. Suitable for cutting material up to 1.5mm

Chip board (packaging), art board, gasket, plastic sheets

PHP31-CB15SP

Blade 1.5mm

Description of Cut

Materials

CB15U-5SP

For cutting media which is too thick for the CB09UA blade to handle. Suitable for cutting material up to 25 mil thick

Chip board (packaging), art board, gasket, plastic sheets

CB15U-K30SP

For cutting sandblast rubber. The sharply angled point provides a longer cutting edge. Suitable for cutting material up to 35 mil.

Sandblast rubber

Blades and blade holders subject to change without notice.

Please contact your GRAPHTEC dealer for availability of genuine GRAPHTEC blades and blade holders.

« close »