Home  
page image
spacer
 
spacer
  "MARK SCAN ERROR" message  
 
spacer
  When using Cutting Master 2 plug-in
for your contour cutting job.
Cutting Plotter Language MUST BE CHANGED to Language GPGL.

All cutting plotters, except for the FC8000, MUST BE MANUALLY CHANGED from HPGL to GPGL in order for the software and computer to recognize the machine through Cutting Master 2.
 
 
 
Testing Registration Mark Sensor
FC8000 and CE5000
 
 
 
Not Reading Registration Marks for some print and cut jobs on high gloss or lamniated, printed media. When using some glossy media or when using glossy laminated prints, sometimes the sensor may need to be adjusted. If the sensor is finding some of the registration marks and not others, the optimum setting has been determined to be X=70 and Y=80. By following the steps below the sensor values can be set.
 
 
 
spacer