Cutting Master 3 Mac Downloads




mac-icon  Download Files

adobe illustrator cutter plotter cutting plugin  Version 2.2.1174 (Latest version)

Note: Version 2.2.1174 Cutting Master 3 is not compatible with MAC OS X 10.5 or earlier
Cutting Master 3 Version 2.1.211 must be used for MAC OS X 10.5

Date of update October 13, 2016
Supported Products(*2) FC8600 series / FC8000 series / FC4500 series / FC2250 series
CE6000 series / CE5000 series
Supported OS(*3) Mac OS X 10.6 to 10.11
Supported software Adobe Illustrator (*1) CS4, CS5, CS6, CC, CC2015
Recommended system requirements Processor Processor with 1 GHz or faster, 2 GHz is preferable. Macintosh computer using the Intel processor
RAM 1 GB, 2 GB preferred
Install space needed 100MB
Video 800×600 resolution monitor with 32 bit color or better. (1024 x 764 preferred)
Downloading files Software Adobe Illustrator CC/CC2015   CM3_V2.2.1174.001_STU_CC.dmg (86.7 MB)
Adobe Illustrator CS6   CM3_V2.2.1174.001_STU_CS6.dmg (86.8 MB)
Adobe Illustrator CS5   CM3_V2.2.1174.001_STU_CS5.dmg (86.8 MB)
Adobe Illustrator CS4   CM3_V2.2.1174.001_STU_CS4.dmg (86.8 MB)
How to check the version VerCM3_Mac_EN_01.pdf (141 KB)
How to install the software InsCM3_Mac_EN_02.pdf (261.9 KB)
(*)
Cutting Master 3 and Cutting Master 2 cannot be used simultaneously.
Cutting Master 2 needs to be closed before Cutting Master 3 is started.
(*1)
PC system needs to be fit with the system requirement for Adobe Illustrator.
Notice for using the Illustrator CS6 / CC / CC2015

When the data file in the Illustrator 9 format is opened using the Illustrator CS6 / CC / CC2015, the name of all layers are changed to "layers". The Cutting Master 3 cannot to recognize registration mark because the name of layer for the registration mark is also changed. The cause of this phenomenon is not the Cutting Master 3. It is issue of the Illustrator CS6 / CC / CC2015. It occurs when the illustrator 9 format data is opened by the Illustrator CS6 / CC / CC2015.
Workaround

  • Please resave the data file to Illustrator 8 format in the Illustrator 9 before opens the data file by the Illustrator CS6 / CC / CC2015.
  • Please resave the data file in a format other than the Illustrator 9 using the Illustrator CS5 or older edition before opens the data file by the Illustrator CS6 / CC / CC2015.
(*2)
The firmware needs to be the following version.
▪ CE6000 series: version 1.20 or later
▪ FC8000 series: version 3.01 or later
▪ CE5000 series: version 3.80 to version 4.90
▪ CE5000 series: version 6.10 or later
▪ FC4500 series: version 1.92 or later
▪ FC2250 series: version 3.90 or later
▪ FC8600 series: version 1.11 or later
(*3)
In the Cutting Master 3 version Ver.2.1.721 or the later, it can not be used in the Mac OS X 10.5 even if the Mac OS X 10.5 is included in the system requirements on the user’s manual for the Cutting Master 3.

 

Ver.2.1.211

Date of updated November 1, 2013
Supported Products(*2) FC8600 series / FC8000 series / FC4500 series / FC2250 series
CE6000 series / CE5000 series
Supported OS Mac OS X 10.5
Supported software Adobe Illustrator (*1) CS4, CS5, CS6, CC
Recommended system requirements Processor Processor with 1 GHz or faster, 2 GHz is preferable. Macintosh computer using the Intel processor
RAM 1 GB, 2 GB preferred
Install space needed 100MB
Video 800×600 resolution monitor with 32 bit color or better. (1024 x 764 preferred)
Downloading files Software Adobe Illustrator CC   CM3_V2.1.211.1009_STU_CC.dmg (83.1 MB)
Adobe Illustrator CS6   CM3_V2.1.211.1009_STU_CS6.dmg (83.1 MB)
Adobe Illustrator CS5   CM3_V2.1.211.1009_STU_CS5.dmg (83.1 MB)
Adobe Illustrator CS4   CM3_V2.1.211.1009_STU_CS4.dmg (83.1 MB)
How to check the version VerCM3_Mac_EN_01.pdf (141 KB)
How to install the software InsCM3_Mac_EN_02.pdf (261.9 KB)
(*)
Cutting Master 3 and Cutting Master 2 cannot be used simultaneously.
Cutting Master 2 needs to be closed before Cutting Master 3 is started.
(*1)
PC system needs to be fit with the system requirement for Adobe Illustrator.
Notice for using the Illustrator CS6 / CC

When the data file in the Illustrator 9 format is opened using the Illustrator CS6 / CC, the name of all layers are changed to "layers". The Cutting Master 3 cannot to recognize registration mark because the name of layer for the registration mark is also changed. The cause of this phenomenon is not the Cutting Master 3. It is issue of the Illustrator CS6 / CC. It occurs when the illustrator 9 format data is opened by the Illustrator CS6 / CC.
Workaround

  • Please resave the data file to Illustrator 8 format in the Illustrator 9 before opens the data file by the Illustrator CS6 / CC.
  • Please resave the data file in a format other than the Illustrator 9 using the Illustrator CS5 or older edition before opens the data file by the Illustrator CS6 / CC.
(*2)
The firmware needs to be the following version.
▪ CE6000 series: version 1.20 or later
▪ FC8000 series: version 3.01 or later
▪ CE5000 series: version 3.80 to version 4.90
▪ CE5000 series: version 6.10 or later
▪ FC4500 series: version 1.92 or later
▪ FC2250 series: version 3.90 or later
▪ FC8600 series: version 1.11 or later