compact remote datalogging temperature CO2 climate monitor



AC Current Sensor Adapter

AC alternating current datalogger

Measure electric power current by connecting an AC current sensor (50A clamp/GS-AC50A; 100A clamp/GS-AC100A; 200A clamp/GS-AC200A) single-phase 2 wire, single-phase 3 wire, thre-phase 3 wire, etc. to the GL100!

Potential Connection Sensor
50A Clamp (GS-AC50A)
100A Clamp (GS-AC100A)
200A Clamp (GS-AC200A)
All Optional
Measurement Data
Current, Power, Accumulated electric power (accumulated value dusplay during recording only)
Measurement ch
Up to 2ch depending on sensor
Input Method
RMS converter + Scan equation, non-isolated input 3 types of sensor connections
Measurement Accuracy
<Main unit + sensor>
±2.0% FS ± 1 digit
(Ambient temperature 23ºC, rated value input, rated value frequency)
Target Measurement Frequency
50Hz / 60Hz
Single-phase 2 wire, single-phase 3 wire, three-phase 3 wire
Measurement Display Function
Electric current, Electric power (instant electric power, or accumulated power)
Single Sequence Rated Value Electric Current
GS-AC50A : 50A RMS
GS-AC100A : 100A RMS
GS-AC200A : 200A RMS
Processor Functionality
Accumulated electric power: 0 to 999,999kWh *Count resets at start of recording
AC100V, 50/60Hz, 1min
Case – Inuput/Output Terminal all together
Sampling Intervals
0.5 | 1 | 2 | 5 | 10 | 20 | 30 sec
1 | 2 | 5 | 10 | 20 | 30 | 60 min
Extension Cable
AC Current sensor adapter
Approx. 20cm
AC Current sensor Approx. 20cm
Operating Environment
-10º to 50ºC, 80% RH and below (non-condensed)
External Dimensions
46mm x 66mm x 27.4mm (excludes protrusion)
55g (1.94 oz)