Arraycorders Memory Recorder
WR300 Series

 
  The WR310 Series Thermal Arraycorders are economical waveform recorders available in 4, 8 and 16 channel configurations. Unlike old-fashioned paper-only recorders, the WR310 series is a 21st century technology through and through.
 

Available are convenient 2-channel plug-in modules that adapt the WR300 to a wide variety of input types and sensors, including voltages up to 500 V, strain gages, thermocouples, frequency/RPM signals, and more. There’s also a logic input amp which offers the same number of inputs as the base machine (4, 8, or 16).


Capture data to memory, to the paper, or to the optional hard drive* or PCM-CIA flash RAM memory card. Data are shown all the time of the 8.4″ color LCD screen in a variety of formats, including scroll. oscilloscope, XY, and even FFT! Data can be printed in real time or after acquisition, to the built-in 100 or 200 mm wide chart output.*


 
Ethernet and USB interfaces are built-in so that you can control the system from your computer (OPS software is included). The same software and interfaces can also transfer data to your computer and convert it to several popular formats, including Excel and delimited ASCII.
   
WR300 16-channel unit left side – showing 8 WR3 series 2-channel input amps plugged in, plus 4 x 4-ch logic amps (round connectors below)
   

Various chart types and sizes are supported

WR300 8 or 16-ch unit with the optional Z-fold paper take-up capability

Easy Operation – Intuitive Controls

A separate bank of chart speed setting keys enables you to change the chart speed at any time, and four directional cursor keys are provided for easy menu selection. The additional buttons of the WR310 makes this unit even easier to use than similar products.
 

Wide Format Printing*

The wide 200 mm (8 inch) paper allows data to be printed with ultimate clarity and precision – even better than what can be shown on the built-in LCD display.
 

Data Upload to Your PC

OPS023 control/transfer/conversion software is included, so you can convert data captured to Excel™ or delimited ASCII format. Need more analysis power? FlexPro™ can open Graphtec data files natively, providing a powerhouse analytical capabilities with an Excel-like interface

Excel is a registered trademark of Microsoft Corporation
FlexPro is a trademark of Weisang GMBH

Main Features

  • Models available with 4, 8 or 16 input channels
  • 8.4″ color LCD monitor for data display and the graphical user interface
  • Plug-in 2-channel WR3 series amplifiers adapt the system to a wide variety of input types and sensors.
  • Up to 1 MS/s sampling rate on all channels
  • Bandwidth (frequency response): dc to 50 kHz
  • 1 MSample internal memory PER CHANNEL is standard
  • Built-in 200mm (8″) wide thermal array printer in the 8- and 16-ch models; 100 mm wide printer in the 4-ch model
  • Interfaces: Ethernet, USB, and slot for flash memory cards
  • Performance, reliability and ease of use Includes PC software for control, data transfer and conversion to popular formats
 
    Options & Upgrades

  • WR3 series plug-in modules (2-ch each)
  • 40 GB internal HDD*
  • Flash memory cards for the PCM-CIA drive
  • 4-, 8-, or 16-channel logic input module
  • IRIG time code interface option*
  • DC power option in lieu of 120/240 VAC 50/60 Hz
 
* WR310 series 8 and 16 channel models are available with the IRIG and 40 GB hard drive (HDD) options. WR300 series models are not compatible with these options. the WR300-4 four channel model has a 100mm wide chart instead of 200mm wide chart.
 

   » Download the WR300 Series Brochure/Spec Sheet 3.6MB

 » Contact Graphtec Instruments Sales Team For Dealers

Go Back to Instruments Main Page