Graphtec Corporation

ROBO Master (OPS656) Ver.5.10 Supplementary Information
-------------------------------------------------------------------------------

Introduction

This file provides important information on the use of the ROBO Master
(OPS656).
Be sure to read through this file carefully before attempting to use the ROBO
Master.


Operating Environment

  OS      : Windows 2000, Windows XP, Windows Vista or Windows 7
  CPU     : Pentium III 600 MHz or more
  Memory  : 128 MB or more (at least 256 MB recommended)
  Monitor : Capable of displaying 1024 x 768 pixels, High Color
            (True Color recommended)
  Mouse
  CD-ROM Drive


Installation

Run the SETUP.EXE file to begin installation. Follow the on-screen 
instructions to complete the installation.


Usage Precautions

  1) Correct operation with either Windows 95, Windows 98 Second Edition,
     Windows Me or Windows NT 4.0 is not guaranteed.

  2) Please refer to the Craft ROBO User's Manual for information on 
     registration mark alignment.

  3) If Cropping will be performed in Output Settings >Common Settings, 
     please use a size smaller than A4. In addition, please use a smaller 
     size when using this function together with the Tiling function in 
     Output Settings.

  4) We recommend that an inkjet printer be used for printing images that 
     will be cut on the Craft ROBO. With laser printers, the printed images 
     may become distorted due to paper skew or slanted feeding. This makes 
     it difficult to align the cutlines with the pre-printed images for print 
     & cut operations, and there may be large discrepancies in the alignment 
     positions, especially in areas that are not close to the registration 
     marks.

  5) Do not run the Craft ROBO controller or press the Craft ROBO Controller 
     button while the Craft ROBO is operating.


Trademarks

* Windows, Windows NT are registered trademarks of Microsoft Corporation.
* Graphtec has exclusive copyrights to the Craft ROBO, ROBO Master, and 
  OPS656 product names.

END