Table of Contents
- 5. Assembling the Printer and the Installation Procedure
- 5-1. Notes on the Installation Environment
- 5-2. Removing the Printer from its Packaging
- 5-3. Mounting the Ink Tanks
- 5-4. Mounting the Waste Ink Tanks
- 5-5. Connecting the Power Supplies
- 5-6. Setting the Print Speed
- 5-7. Executing the Moving Test
- 6. Initial Ink Induction Procedure
- 6-1. Initial Cleaning of the Ink Supply Tubes and the Sub Tanks
- 6-2. Initial Cleaning of the Cleaning Solution Supply Tubes
- 6-3. Mounting the Print heads
- 6-4. Print head height Adjustment
- 6-5. Initial Print head Cleaning Procedure
- 6-6. Ink Induction
- 7. Media Loading Procedure
- 7-1. Loading the Media
- 7-2. Adjusting the auto feed function
- 7-3. Winding the Media onto the Take-up Unit
- 7-4. Adjusting the auto take-up function
- 7-5. Setting the Media Width
- 8. Print head Adjustment Procedures
- 8-1. Setting the Print head Drive Voltage
- 8-2. Installing the Printer Adjustment Utility Software “Try”
- 8-3. Connecting the Print Heads
- 8-4. Launching the Try Utility
- 8-5. Printing the Nozzle Check Pattern
- 8-6. Adjusting the Positions of Print heads of the Same Color
- 8-7. Adjusting the Positions of Print heads of a Different Color
- 8-8. Media Feed Amount Compensation
- 8-9. Bi-directional Printing Band Adjustments
|
