5. Assembling the Printer and the Installation Procedure

5-2. Removing the Printer from its Packaging

1. Remove the top panel and the four side panels.

2. Remove the accessories box and the waste ink tanks.
3. Remove the printer fastenings.

4. Move the printer off the base used to hold it in place.
   Use a forklift to raise the printer off the base.

   
   Before raising the printer, align the direction of the wheels with the direction of the rectangular holes.
   If they are not aligned, the wheels will catch on the edges of the holes when the printer is raised.
   The printer weighs approximately 305 kg. There is a risk of lower back injury to the person(s) attempting
   to lift the printer. Use a forklift to move the printer.

5. Move the printer.
   Unlock the casters, and then move the printer to its installation location.
   If the installation location is on a different level or if there is a steep slope leading up to it, use a forklift or crane to move the printer.

   
   The printer weighs approximately 305 kg. There is a risk of lower back injury to the person(s) attempting
   to lift the printer. Use a forklift or crane to move the printer if the installation location is on a different
   level or if there is a steep slope leading up to it.

6. Lock the casters.

7. Remove the plastic sheets and fastening bands.
   Remove the formed blocks.
   Remove the print head carriage fastening (remove the screws).

   
   Store the print head carriage fastening in a safe place so as not to lose it.