6. Initial Ink Induction Procedure

6-5. Initial Print head Cleaning Procedure

6. Clean the print head nozzles.

   1. Set the levers on the cyan and magenta 3-way valves to the cleaning solution supply position.
   2. Set the levers on the yellow and black 3-way valves to the ink supply position.

   3. Press the Solution button to feed cleaning solution through the cyan and magenta print head nozzles.
      Hold down the Solution button until the cleaning solution flows out of all four print heads.

   4. Set the levers on the yellow and black 3-way valves to the cleaning solution supply position.
   5. Set the levers on the cyan and magenta 3-way valves to the ink supply position.
   6. Press the Solution button to feed cleaning solution through the yellow and black print head nozzles.
      Hold down the Solution button until the cleaning solution flows out of all four print heads.
7. Leave the print heads in this status for 10 minutes to ensure that the protecting liquid is completely dissolved.
   Leave the print heads in this status for 10 minutes.
8. Feed out any cleaning solution remaining in the print heads.
   Using the procedure described in step (6) above, feed out any remaining cleaning solution from all of the print head nozzles.