7. Media Loading Procedure

7-2. Adjusting the auto feed function

  1. Set the rotation direction switch on the media feeding system to the direction opposite to the direction set earlier.
  2. Rewind the media manually.
    Set the selector switch on the media feeding system to the “I” (Manual) position, rewind the media to the position where the orange LED does not light, and then return the selector switch to the position between the “II” and “I” markings (the OFF position, “O”).

  1. Check that the orange LED does not light even if an object is placed behind it.

  2. Check that the media stops at the sensor after it has been fed automatically.
    Set the selector switch on the media feeding system to “II” (Auto).