8. Print head Adjustment Procedures

8-6. Adjusting the Positions of Print heads of the Same Color

Here we will describe the adjustment procedure for the cyan print heads. Perform the same procedure for the magenta, yellow, and black print heads.

1. Select the print mode.

   1. Press the ONLINE key on the control panel to put the printer into ONLINE status.

   2. On the menu bar, click File -> Print Setup.

      

2. Set the following settings to print adjustment pattern:

   1. Apply a check in the box in front of “Color C” (Cyan). This depends on which color is adjusted.
   2. Remove the checks from the boxes in front of the other three colors (Color M (Magenta), Color Y (Yellow), and Color K (Black)). This depends on which color is adjusted.
   3. Select “Test Mode” for “Print Mode”.
   4. Remove the check from the box in front of “BiDirection”.

   5. Click “OK”.

      

3. Select an adjustment pattern and print it.
   1. On the menu bar, click File -> Open.
   2. Open the file “C: /Try/SmallGrid126.group”

   3. Click the Right arrow button on the tool bar to print the selected pattern.

      

   4. Only cyan will be printed as shown in picture below.