CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  CE6000 PLUS

CE6000 PLUS - BLADE

 
            SKU# CB09UB

            SKU# CB09UB

Standard blade for vinyl cutting, and  self-adhesive marking film (PCV film), up to 0.25 mm thick.  The maximum cutting distance is aproximately 4000m.

Angle 45°   Diameter 0.9mm

 

        SKU# CB09UB-K60

        SKU# CB09UB-K60

Special blade for cutting the window tint film or thin film, up to 0.25 mm thick.

Angle 60°   Diameter 0.9mm

 

             SKU# CB15U

             SKU# CB15U

Standard blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick.

Angle 45°   Diameter 1.5mm

 

                    SKU# CB15UA

                    SKU# CB15UA

For High intensity reflective film

Angle 45°   Diameter 1.5mm

 

         SKU# CB15U-K30

         SKU# CB15U-K30

Special blade for cutting rigid media, 0.25 mm to 0.5 mm thick.  And also small detailed characters on marking film (up to 0.25mm).  Recommended blade for sandblast rubber resist media cutting and Avery Series of Reflective Sheeting.

Angle 30°   Diameter 1.5mm

 

CE6000 PLUS - BLADE HOLDERS

 
   SKU# PHP33-CB09N-HS     SPRING BUILT-IN TYPE

   SKU# PHP33-CB09N-HS

    SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB09UB, CB09UB-K60

Designed for use with 0.9mm CB09UB Blades for vinyl and window tint film Cutting.  Not recommended for CB09UA blades with springs.

 

      SKU# PHP35-CB09-HS       SPRING BUILT-IN TYPE

      SKU# PHP35-CB09-HS

      SPRING BUILT-IN TYPE

Compatible with blade: SKU# CB09UB-K60

0.9mm Blade Holder with Blue Top, and Brass Tip / for 0.9mm CB09 Blades.
ATTENTION: If you are using CB09UA Blade (with spring); Insert only the CB09UA blade without the spring.  This bladeholder, plunger design already includes an internal spring.  These brass tip bladeholder, plungers are more rigid and lend to more accurate cuts.

 

    SKU# PHP33-CB15N-HS      SPRING BUILT-IN TYPE

    SKU# PHP33-CB15N-HS

     SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15U, CB15U-K30*

For use with 1.5mm CB15 Blades.

 

      SKU# PHP35-CB15-HS       SPRING BUILT-IN TYPE

      SKU# PHP35-CB15-HS

      SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15U, CB15UA, CB15U-K30*

1.5mm Blade Holder with Red Top, and Brass Tip For CB15 Blades.  These brass tip bladeholders/plungers are more rigid and lend to more accurate cutting.

NOTE: REMOVE CB15 SP Blade spring before installing into this blade holder.  DO NOT install any blade spring.

 

* Suitable for a rigid media, 0.25 - 0.5 mm thick or cutting small detailed characters on marking film (up to 0.25mm)


CE6000 PLUS - RECOMMENDED SETTING ON CONTROL PANEL

CONTROL PANEL SETTING / GRAPHTEC STUDIO / CUTTING MASTER 3
TOOL OFFSET FORCE SPEED ACCELERATION
CE6000 PLUS* OTHER** +31 10 - 14 30 or less 2

* CE6000-40-PLUS/60-PLUS/120-PLUS only.
** CE6000 PLUS, CB15U-K30 can not be selected as the TOOL type. Please select [OTHER] instead, and set the each value indicated as above.

 

CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  CE6000 PLUS

Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out