CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  FC8000

FC8000 - BLADES

 
                   SKU# CB09UA

                   SKU# CB09UA

For Vinyl media up to 0.25mm

Angle 45°   Diameter 0.9mm

 

                SKU# CB09UA-K60

                SKU# CB09UA-K60

For Ultra thin media

Angle 60°   Diameter 0.9mm

 

               SKU# CB15U-K20-2SP

               SKU# CB15U-K20-2SP

For Sand-blast rubber

Angle 20°   Diameter 1.5mm

 

       SKU# CB09UB

       SKU# CB09UB

Standard blade for vinyl cutting, and  self-adhesive marking film (PCV film), up to 0.25 mm thick.  The maximum cutting distance is aproximately 4000m.

Angle 45°   Diameter 0.9mm

 

         SKU# CB15U

         SKU# CB15U

Standard blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick.

Angle 45°   Diameter 1.5mm

 

     SKU# CB15U-K30

     SKU# CB15U-K30

Special blade for cutting rigid media, 0.25 mm to 0.5 mm thick.  And also small detailed characters on marking film (up to 0.25mm).  Recommended blade for sandblast rubber resist media cutting and Avery Series of Reflective Sheeting.

Angle 30°   Diameter 1.5mm

 

        SKU# CB15UA

        SKU# CB15UA

Special blade for cutting High-intensity reflective film or harder film.  High intensity reflective media cutting blade.

Angle 45°   Diameter 1.5mm

 

   SKU# CB15UA-K30

   SKU# CB15UA-K30

Special blade for cutting High-intensity reflective film or harder film.  High intensity reflective media cutting blade.

Angle 30°   Diameter 1.5mm

 

FC8000 - BLADE HOLDERS

 
    SKU# PHP33-CB09N-HS      SPRING BUILT-IN TYPE

    SKU# PHP33-CB09N-HS

     SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB09UA, CB09UA-K60, CB09UB

Designed for use with 0.9mm CB09UB Blades for vinyl and window tint film Cutting.  Not recommended for CB09UA blades with springs.

 

  SKU# PHP35-CB09-HS   SPRING BUILT-IN TYPE

  SKU# PHP35-CB09-HS

  SPRING BUILT-IN TYPE

Compatible with blade: SKU# CB09UB

0.9mm Blade Holder with Blue Top, and Brass Tip / for 0.9mm CB09 Blades.
ATTENTION: If you are using CB09UA Blade (with spring); Insert only the CB09UA blade without the spring.  This bladeholder, plunger design already includes an internal spring.  These brass tip bladeholder, plungers are more rigid and lend to more accurate cuts.

 

   SKU# PHP33-CB15N-HS      SPRING BUILT-IN TYPE

   SKU# PHP33-CB15N-HS

     SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15UA, CB15U-K20-2SP w/spring, CB15U-K30*

For use with 1.5mm CB15 Blades.

 

    SKU# PHP35-CB15-HS     SPRING BUILT-IN TYPE

    SKU# PHP35-CB15-HS

    SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15U, CB15UA,CB15U-K20-2SP w/spring, CB15U-K30*

1.5mm Blade Holder with Red Top, and Brass Tip For CB15 Blades.  These brass tip bladeholders/plungers are more rigid and lend to more accurate cutting.

NOTE: REMOVE CB15 SP Blade spring before installing into this blade holder.  DO NOT install any blade spring.

 

* Suitable for a rigid media, 0.25 mm to 0.5 mm thick or cutting small detailed characters on marking film (up to 0.25mm)

 

CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  FC8000

Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out