CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  FCX2000

FCX2000 - BLADES

 
        SKU# CB09UB

        SKU# CB09UB

Standard blade for vinyl cutting, and  self-adhesive marking film (PCV film), up to 0.25 mm thick.  The maximum cutting distance is aproximately 4000m.

Angle 45°   Diameter 0.9mm

 

             SKU# CB15U

             SKU# CB15U

Standard blade for cutting rigid or thicker media, 0.25 mm to 0.5 mm thick.

Angle 45°   Diameter 1.5mm

 

         SKU# CB15U-K20

         SKU# CB15U-K20

Special blade for cutting sandblast resist rubber. 1.5mm 20° Supersteel blade with spring.  Recommended for sandblast rubber resist media cutting.

Angle 20°   Diameter 1.5mm

 

        SKU# CB15U-K30

        SKU# CB15U-K30

Special blade for cutting rigid media, 0.25 mm to 0.5 mm thick.  And also small detailed characters on marking film (up to 0.25mm).  Recommended blade for sandblast rubber resist media cutting and Avery Series of Reflective Sheeting.

Angle 30°   Diameter 1.5mm

 

           SKU# CB15UA

           SKU# CB15UA

Special blade for cutting High-intensity reflective film or harder film.  High intensity reflective media cutting blade.

Angle 45°   Diameter 1.5mm

 

      SKU# CB15UA-K30

      SKU# CB15UA-K30

Special blade for cutting High-intensity reflective film or harder film.  High intensity reflective media cutting blade.

Angle 30°   Diameter 1.5mm

 

          SKU# CB30UC-1

          SKU# CB30UC-1

3.0mm Super steel Blade for thick rigid materials or media up to 1.2 mm.  Cutting accuracy is not guaranteed.  Be sure to try it before using it.  

Angle 45°   Diameter 3.0mm

 

         SKU# CB30UC-1

         SKU# CB30UC-1

Special blade for thicker media, 1.0 mm to 2.0 mm thick.  Cutting accuracy is not guaranteed. Be sure to try it before using it.

Angle 30°   Diameter 3.0mm

 

FC4500 - BLADE HOLDERS

 
SKU# PHP33-CB09N-HS  SPRING BUILT-IN TYPE

SKU# PHP33-CB09N-HS

 SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB09UB

Designed for use with 0.9mm CB09UB Blades for vinyl and window tint film Cutting.  Not recommended for CB09UA blades with springs.

 

  SKU# PHP35-CB09-HS   SPRING BUILT-IN TYPE

  SKU# PHP35-CB09-HS

  SPRING BUILT-IN TYPE

Compatible with blade: SKU# CB09UB

0.9mm Blade Holder with Blue Top, and Brass Tip / for 0.9mm CB09 Blades.
ATTENTION: If you are using CB09UA Blade (with spring); Insert only the CB09UA blade without the spring.  This bladeholder, plunger design already includes an internal spring.  These brass tip bladeholder, plungers are more rigid and lend to more accurate cuts.

 

   SKU# PHP33-CB15N-HS      SPRING BUILT-IN TYPE

   SKU# PHP33-CB15N-HS

     SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15U, CB15UA, CB15U-K20 w/spring, CB15U-K30*

For use with 1.5mm CB15 Blades.

 

    SKU# PHP35-CB15-HS     SPRING BUILT-IN TYPE

    SKU# PHP35-CB15-HS

    SPRING BUILT-IN TYPE

Compatible with blades: SKU# CB15U, CB15UA,CB15U-K20 w/spring, CB15U-K30*

1.5mm Blade Holder with Red Top, and Brass Tip For CB15 Blades.  These brass tip bladeholders/plungers are more rigid and lend to more accurate cutting.

NOTE: REMOVE CB15 SP Blade spring before installing into this blade holder.  DO NOT install any blade spring.

 

      SKU# PHP34-CB30-HS

      SKU# PHP34-CB30-HS

Compatible with blades: SKU# CB30UC-1

3.0mm Supersteel Blade for Thick Rigid Materials

 

* Suitable for a rigid media, 0.25 mm to 0.5 mm thick or cutting small detailed characters on marking film (up to 0.25mm)


FCX2000 - RECOMMENED SETTING ON CONTROL PANEL

CONTROL PANEL SETTING / GRAPHTEC STUDIO / CUTTING MASTER 3
TOOL OFFSET FORCE SPEED ACCELERATION
FCX2000 CB15U-K30 0 10 - 14 30 or less 3
 

CUTTING PLOTTERS  >  BLADES AND BLADE HOLDERS   >  FCX2000

Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out