CUTTING PLOTTER   >   PRODUCTS   >   FC8600    >     SPECIFICATIONS


Specifications

Model FC8600-60 FC8600-75 FC8600-100 FC8600-130 FC8600-160
CPU 32-bit CPU
Configuration Grit rolling type
Drive method Digital servo drive
Max. cutting area (W x L) (*1)

2 ft x 164 ft

610 mm x 50 m

2 ft 6 in x 164 ft

762 mm x 50 m

3 ft 6 in x 164 ft

1067 mm x 50 m

4 ft 6 in x 164 ft

1372 mm x 50 m

5 ft 4 in x 164 ft

1626 mm x 50 m

Cutting area of guaranteed accuracy (*2) 23.23 in x 50 ft 29.21 in x 50 ft

41 in x 32 ft,

35.2 in x 50 ft

53 in x 32 ft,

35.2 in x 50 ft

63 in x 32 ft,

35.2 in x 50 ft

Mountable media width

Min. 1.97 in
Max. 30.31 in

Min. 1.97 in
Max. 36.22 in

Min. 1.97 in
Max. 48.19 in

Min. 1.97 in
Max. 60.20 in

Min. 1.97 in
Max. 72.83 in

Max. cross cut width 2 ft 4.9 in (734 mm) 2 ft 10 in (886 mm) 3 ft 10.88 in (1191 mm) 4 ft 10.9 in (1496 mm) 5 ft 8.9 in (1750 mm)
Number of push rollers 2 rollers 2 rollers 3 rollers 3 rollers 4 rollers
Max. cutting speed 4 ft 10.46 in/s (1485 mm/s) at 45° direction
Axial acceleration Max. 39.2 m/s2 (4 G) in 8 steps
Cutting force Max. 5.88 N (600 gf) in 48 steps
Mechanical resolution 0.005 mm
Programmable resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL™: 0.025 mm
Distance accuracy (*2) Max. 0.1 mm or 0.1 % of plotted length
Repeatability (*2) Max. 0.1 mm in plot up to 2 m (excluding the expansion and contraction of the media)
Minimum character size Approx. 3 mm alphanumeric (varies depending on character font and media)
Mountable number of tools 1 tool (cutting blade, plotting pen or pouncing tool) in standard;
2 tools (cutting blade and plotting pen) when second penholder (optional) is installed
Blade types Supersteel (0.9 mm or 1.5 mm diameter)
Pen types Water-based fiber-tip pen, Oil-based ballpoint pen
Pouncing tool type Steel pin 1.2 mm diameter, required optional pouncing tool (PPA 33-TP12)
Media types (*3) Self-adhesive marking film (vinyl, fluorescent, reflective, high-intensity reflective film) up to 0.25 mm thick,
Sandblast resist rubber up to 1 mm thick
Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick
Light pointer Built into the tool carriage
Cross-cutter Built into the tool carriage
Perforation cutting Supported (performed by force control)
Registration mark sensing system Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect
Standard interface USB2.0 (High speed), RS-232C, and Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2 MB
Command sets GP-GL / HP-GL™ emulation (Set by menu or command, and selects from GP-GL, HP-GL™, or Auto select)
Condition settings Dual configuration (save two (2) user settings with eight (8) separate condition setting for each user)
Display Graphic type LCD (3-inch, backlight)
Power source 100 V to 240 V AC, 50 / 60 Hz
Power consumption Max. 160 VA
Operating environment 10 to 35 °C, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment 16 to 32 °C, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H)

Approx. 44" x 28" x 48"

(1120 x 711 x 1219 mm)

Approx. 50" x 28" x 48"

(1270 x 711 x 1219 mm)

Approx. 61.8" x 28" x 48"

(1570 x 715 x 1219 mm)

Approx. 73.6" x 28" x 48"

(1870 x 711 x 1219 mm)

Approx. 84" x 28" x 48"

(2130 x 711 x 1219 mm)

Weight Approx. 38 kgs / 106 lbs
including stand
Approx. 52 kgs / 115 lbs
including stand
Approx. 60 kgs / 133 lbs
including stand
Approx. 68 kgs / 150 lbs
including stand
Approx. 73 kgs / 161 lbs
including stand
Included software (*4) Windows driver, Plotter controller, Graphtec Pro Studio (*5),
Cutting Master 4, Graphtec Studio for Mac
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7
Mac OS 10.7 to 10.12
Compatible Standards UL60950-1, cUL, CE mark (Low voltage and EMC), KC mark (Low voltage and EMC)
FCC-A, EN55022-A

*1. When the 2nd pen holder is installed, the maximum cutting width is changed. (FC8600-60: 601 mm, FC8600-75: 753 mm, FC8600-100: 1053 mm, FC8600-130: 1352 mm, FC8600-160: 1613 mm)

*2. Operated with Graphtec specified media and conditions. In long-length cutting, the basket is used.

*3. When some grades of high-intensity reflective film is used, the using CB15UA/CB15UA-K30 blade and reinforcing the backing sheet of the media are recommended.

*4. For more information about compatibility of the OS or application software, please check the Graphtec website or contact your local representative of Graphtec.

*5. The software can be used by downloading from Graphtec website.


 
Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out