|Configuration||Digital servo system, Flatbed|
|Media hold-down method||Vacuum suction|
|Effective cutting area||24 in x 36 in (610mm x 920mm)||47.2 in x 36 in (1,200mm x 920mm)||70.8 in x 36 in (1,800mm x 920mm|
|Mountable media (Y-axis)||3 ft 1.4 in (950mm)|
|Roll media support||Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg|
|Maximum cutting speed||1 ft 3.7 inch/sec (400 mm/sec) (1 to 40 cm/s in 16 steps), in all directions|
|Cutting force||Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf)|
|Cutting force settings||Tool 1: in 40 steps, Tool 2: in 40 steps|
|Minimum character size||Approx. 10 mm square (varies with character font and media)|
|Programmable resolution||GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm|
|Distance accuracy||Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2)|
|Perpendicularity||Max 0.5 mm / 900 mm (in plotting mode)|
|Repeatability||Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2)|
|Standard interfaces||RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX)|
|Command sets||GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data)|
|Number of tools||Two tools|
|Cutting blade, pen, and tool types||Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool|
|Others||ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes|
|Power source||100 to 240 VAC, 50/60 Hz (Auto switching)|
|Power consumption||Max. 140 VA|
|Pumps||110V has 1.5 horse power, 220V has 2.5 horse power|
|Operating environment||Temperature: +10 to +35 ºC, Humidity: 35 to 75% RH (non-condensing)|
|Guaranteed accuracy environment||Temperature: +16 to +32 ºC, Humidity: 35% to 70% RH (non-condensing)|
[W x D x H] (Approx.)
W 52.9 x D 55.4 x H 36.6 in
1344 x 1409 x 930 mm (Including stand)
W 76.1 x D 55.4 x H 36.6 in
1934 x 1409 x 930 mm (Including stand)
W 99.7 x D 55.4 x H 36.6 in
2534 x 1409 x 930 mm (Including stand)
|Weight (Approx.)||167.5 lb (Including stand) (*3)||218.2 lb (Including stand) (*3)||225.7 lb (Including stand) (*3)|
|Compatible OS (*4)||Windows 10 / 8.1 / 8 / 7, Mac OS X 10.7 to 10.11 / macOS 10.12|
|Included software (*4) (*5)||Cutting Master 4, Graphtec Pro Studio, Graphtec Studio(for Mac)|
|Safety||UL60950-1/cUL, CE marking (Low voltage and EMC)|
*1. Available in a limited region. Please contact your local representative of Graphtec.
*2. When operated with Graphtec specified media and conditions.
*3. Pump (blower) for vacuum suction media hold-down system is not included.
*4. For more information about Windows and Macintosh compatibility, please check the website or contact your local representative of Graphtec.
*5. The software can be used by downloading from Graphtec website.
Main body is packed in a cardboard box, and then it is loaded on the pallet. Leg with a caster for the stand is packed in a cardboard box. It is not loaded on the pallet. The bar for connecting the right and left legs of the stand is packed to the main body.
|Model name||FCX2000-60VC||FCX2000-120VC||FCX2000-180VC||Stand FCX2000 Series|
Dimensions (W x D x H) inches
65.4 x 50 x 18.9
65.4 x 73.3 x 18.9
65.4 x 100 x 18.9
63 x 32.1 x 12.4
|276 lbs||380 lbs||466 lbs||59.4 lbs|