Table Size: W 42.87" x D 35.31" x H 8.03"

Effective Cutting Area: W 25.98" x H 19.21"



Table Size: W 55.31" x D 42.08" x H 8.03" (w/o stand)

Effective Cutting Area: W 38.4" x H 25.9"


Stronger Media Hold-Down

Holds media by electrostatic that is generated by electrodes arranged inside the panel. This method is suitable for cutting light weight materials.

Provided tools suitable for many applications

The FCX4000 series has 2 tool holder in the carriage.  Using 2 different tools in the same job increases work efficiency. 

Intuitive operation with 3.7" LCD

Settings can be easily set using the large 3.7-inch LCD (240 x 128 dots).


USB Offline Operation

Offline operation supported by use of USB flash memory

Cut and plot data is created with Cutting Master 4 or Graphtec Pro Studio. That saved data may be transferred to a USB flash memory and the cut plot data file can be selected from the USB on the FCX4000 using its menu operations. This simplified work-flow enables users to operate without being connected to the computer.

Data management using bar-code function with USB flash memory

When performing contour cutting, also known as “Print & Cut”, the cutting data is automatically selected from the prepared USB flash memory. The FCX4000 scans the bar code printed on the media then automatically performs the contour cutting job. This emerging method helps to prevent operator error of using incorrect data - thus improving workflow efficiency.


Expanded Contour Cutting Area

This included function expands the print and cut area to include objects outside of the registration marks! Production efficiency is enhanced and media waste is reduced.

Supports Standard Crop Marks

Contour cutting pre-printed media is also possible using “standard crop marks.” This operation is available with the included Cutting Master 4 plug-in workflow.

Reversed Color Registration Marks

Registraiton marks are detectable when there is sufficient contrast against the mark and its background. Ultra glossy and reflective media offer challenges for accurate registration mark detection. With this reversed color output, the sufficient contrast is brought back for the ability to contour cut pre-printed ultra glossy and reflecting sheeting.

Media Type

Type of media Thickness Support cutting blade FCX4000-50/60ES
Self-adhesive marking film (vinyl, fluorescent, reflective) up to 0.25 mm CB09UB
Heavy paper/board (pattern paper, oil board) up to 0.5 mm CB15U、
up to 1.0 mm CB30UC -
Compressed foam sheet up to 0.8 mm CB15U-K30
Sandblast resist rubber up to 1.0 mm CB15U-K20
Cardboard E flute up to 1.5 mm CB30UC -
F / G flute up to 1.2 mm CB30UC -
Rubber sheet up to 1~2 mm PM-CB-001 -
Clear sheet for plastic boxes
up to 0.5 mm CB15U
up to 1.0 mm CB15U-K30
High-intensity reflective film up to 0.5 mm CB15UA
up to 1.0 mm CB15UA-K30
Item FCX4000-50ES FCX4000-60ES
Configuration Digital servo system, Flatbed
Media hold-down method Electrostatic panel
Effective cutting area W 42.87" x D 35.31" x H 8.03" W 55.31" x D 42.08" x H 8.03"
Mountable media
(Y-axis direction)
21.10" 27.97"
Maximum cutting speed 29.5"/s (1 to 75 cm/s in 23 steps)
Cutting pressure Tool 1: Max. 5.88 N (600 gf)
Tool 2: Max. 5.88 N (600 gf)
Cutting force settings Tool 1: in 48 steps, Tool 2: in 48 steps
Minimum character size Approx. 10 mm square (varies with character font and media)
Mechanical resolution 0.005 mm (5µm)
Programmable resolution GP-GL mode: 0.1/0.05/0.025/0.01 mm,
HP-GL™ (*1) : 0.025 mm
Distance accuracy Max.0.2% of the distance moved or 0.1mm, whichever is larger
(excluding contraction of media, in plotting/cutting mode) (*2)
Perpendicularity Max 0.3 mm / 16.93"
(excluding contraction of media, in plotting/cutting mode)
Max 0.4 mm / 24.01"
(excluding contraction of media, in plotting/cutting mode)
Repeatability Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2)
Standard interfaces USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX)
Buffer memory 2MB
Command sets GP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™)
Number of tools 2 tools
Cutter blade, pen, and tool types Cutter blade: supersteel
Pen: water-based fiber-tip pen
Creasing/scoring tool
Operating panel 3.7-inch graphical LCD (same LCD as the FCX2000)
New features Dual configuration, Creasing in the curve, Perforation cutting (performed by the force control), Data management using the bar-code, Offline cutting operation using the USB memory, Display the degree of wear for the cutting blade, Confirming the cutting object size, Draft mode (higher throughput in arc)
Power supply 100 to 240 V AC, 50/60 Hz (Auto switching)
Power consumption Max. 120 VA
Operating environment Temperature: 10 to 35 degree C ,
Humidity: 35 to 75% RH (non-condensing)
Guaranteed accuracy environment Temperature: 16 to 32 degree C,
Humidity: 35% to 70% RH (non-condensing)
External dimensions (*3)
(W x D x H)
W 42.87" x D 35.31" x H 8.03" W 55.31" x D 42.08" x H 8.03"
(including stand : W 55.31" x D 43.18" x H 35.27")
Weight approx. 63.93 lbs (29kg) approx. 83.77 lbs (38 kg)
(including stand 121.25 lbs (55 kg)
Compatible OS (*4)(*5) Windows 10 (Home / Pro / Enterprise / Education)
Windows 8.1 (Windows 8.1 / Pro / Enterprise)
Windows 8 (Windows 8 / Pro / Enterprise)
Windows 7 (Ultimate / Enterprise / Professional / Home Premium)
Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 10.13 (High Sierra)
Supported software Cutting Master 4, Graphtec Pro Studio, Graphtec Studio for Mac, Windows Driver
Safety UL/cUL, CE mark
EMC VCCI Class A, FCC Class A, CE mark (EN55032, others)

*1. HP-GL™ is registered trademark of the Hewlett-Packard Corporation of the United States.

*2. When operated with Graphtec specified media and conditions.

*3. Tolerance: +/- 5 mm

*4. Graphtec does not support software/driver used with operating systems that have become obsolete and are no longer supported by the OS developer.

*5. For more information about Windows and Macintosh compatibility, please check the website or contact with your local representative of Graphte

FCX4000-50ES External Dimensions

Flatbed Cutter, Flatbed Cutting Plotter, Flatbed Packaging Cutter Graphtec FCX4000-50

FCX4000-60ES External Dimensions no Stand

Flatbed Cutter, Flatbed Cutting Plotter, Flatbed Packaging Cutter Graphtec FCX4000-60
Member Login
Welcome, (First Name)!

Forgot? Show
Log In
Enter Member Area
My Profile Not a member? Sign up. Log Out