Graphtec Plotter Driver OPS628 Ver. 10.40
for Windows 10 x64 Edition / Windows 11

Thank you for choosing the Graphtec OPS628 Plotter Driver. 

The README.TXT file in each directory contains instructions on installation and
operation as well as other notes. Be sure to read them carefully before 
installing or using this driver.

Before you begin installation, check that the program disk contains the 
following:
  GDSETUP64.EXE
  GDSETUP.INI

  WIN_X64\DISK1               For Windows 10 x64 Edition / Windows 11
  WIN_X64\GPGL64.DLL
  WIN_X64\GPGLUI64.DLL
  WIN_X64\GPGLUI.CHM
  WIN_X64\GTCGLMON64.DLL
  WIN_X64\OEMSETUP64.INF
  WIN_X64\OEMSETUP64.CAT
  WIN_X64\README.TXT
  WIN_X64\GX3000.GPD
  WIN_X64\MP5000.GPD
  WIN_X64\MP303.GPD
  WIN_X64\FP8000.GPD
  WIN_X64\FP9000.GPD
  WIN_X64\PT5M.GPD
  WIN_X64\CE1000.GPD
  WIN_X64\CE2000.GPD
  WIN_X64\CE2120AP.GPD
  WIN_X64\CE3000.GPD
  WIN_X64\CE3120AP.GPD
  WIN_X64\CE5120AP.GPD
  WIN_X64\FC2230.GPD
  WIN_X64\FC3200.GPD
  WIN_X64\FC3600.GPD
  WIN_X64\FC4100.GPD
  WIN_X64\FC4200.GPD
  WIN_X64\FC5100.GPD
  WIN_X64\FC612.GPD
  WIN_X64\TM1040.GPD
  WIN_X64\TM1030.GPD
  WIN_X64\TM1031.GPD
  WIN_X64\TM1220.GPD
  WIN_X64\TM1220B.GPD
  WIN_X64\TM1220S.GPD
  WIN_X64\TM1220R.GPD
  WIN_X64\JC9000.GPD
  WIN_X64\JX1000.GPD
  WIN_X64\JX2000.GPD
  WIN_X64\CE6120AP.GPD
  WIN_X64\CE7130AP.GPD
  WIN_X64\CE8130AP.GPD

  WIN_X64\JC80AXPM.TBC        For Color Adjustment
  WIN_X64\JC80AXST.TBC
  WIN_X64\JC80AXTC.TBC
  WIN_X64\JC80AXTM.TBC
  WIN_X64\JC80JRPF.TBC
  WIN_X64\JC80PRG.TBC
  WIN_X64\JC80RVLM.TBC
  WIN_X64\PRG.JX2


Required PC specifications
(The specification needs to be higher than recommended specification
 by using OS)
* OS           : Windows 10 x64 Edition
                  (Home / Pro / Enterprise / Education)
                 Windows 11
                  (Home / Pro / Enterprise / Education)
* CPU          : 1GHz 64-bit (x64) processor or faster
* Memory       : 1GB or larger
* Display      : 1024x768 True Color
* Mouse
* CD-ROM drive
* USB interface      : USB2.0(Full Speed)
* Serial interface   : RS-232C
* Parallel interface : Centronics parallel interface
Note:
 The interface which can be used depends on the plotter model.
 The plotter needs to be connected with either interface.


Precautions to be observed when connecting the FC5100 or CE3000, FC3600, 
CE3000-120AP, MP303-04, CE5000-120AP, CE6000-120AP, CE7000-130AP, CE8000-130AP 
via USB
   * Operation with other than the included driver is not guaranteed.
   * Do not connect multiple plotters to a single computer.
   * Operation is not guaranteed if the plotter is connected to a USB hub 
     or to a USB extension board.

END
