GL860 SPECIFICATIONS

Item Description
Number of analog input channels Maximum 200ch available for 1 terminal(20ch/30ch) or extension unit
External input/
output (*1) 		Input Trigger or Sampling (1 channel), Logic/Pulse (4 channels)
Voltage range ：0 – ＋24V（common ground）
Input signal: No-voltage contact (a-contact, b-contact, NO, NC)
Open collector, Voltage input
Output Alarm (4 channels)
Output signal: Open collector (pull-up to 5V by 10kΩ resistor)
<Maximum rating of the output transistor>
Voltage: Max. 30V
Current: Max. 0.5A
Collector dissipation: Max. 0.2W
Sampling interval 5ms – 1h（5ms – 50ms is available for voltage and humidity, Number of channels is limited, external※1
TIME / DIV 1 sec to 24 hour
Trigger function Repeat action Off, On
Trigger type Start: Data capture starts when a trigger is generated.
Stop: Data capture stops when a trigger is generated.
Trigger setting (Start / Stop)
Off, Level, Alarm, External, Time, Date, Week
Alarm function Alarm judgement mode Detection method: Level, Edge
Analog channel judgment mode: H (↑), L (↓), Window In, Window Out
Logic channel judgment mode: H (↑), L (↓)
Pulse channel judgment mode: H (↑), L (↓), Window In, Window Out
Calculation channel judgment mode: H (↑), L (↓), Window In, Window Out
Pulse input
function 		Measurement mode
Rotation count (RPM) mode
Accumulating count mode
Instant count mode
Maximum number of pulse inputs Maximum input frequency : 50kHz
Maximum number of count : 50kC/sampling (16-bit counter)
Interface to PC USB2.0 (Hi-speed), Ethernet (10BASE-T / 100BASE-TX), Wireless LAN(using B-568 option)
Storage
device 		Internal Built-in 8GB Flash Memory (*2)
External One SD card slot (Support SDHC memory card, up to 32GB) ( * 2 ) (*3)
Saved contents Captured data, Setting conditions, Screen copy
Display 4.3-inch TFT color LCD (WQVGA: 480 × 272 dots)
Operating environment 0 to 45 ºC, 5 to 85 % RH (non condensed)
(When operating with battery pack 0 to 40 ºC, charging battery 15 to 35 ºC)
Power source AC adapter 100 to 240 V AC, 50/60 Hz (1 pc of adapter is attached as standard accessory)
DC power 8.5 to 24 V DC (DC drive cable (option B-514) is required)
Battery pack Mountable battery pack (battery pack (option B-573): 7.2V DC, 2875mAh)
Power consumption Max. 36 VA
(Rating under maximum power consumption using the AC adapter, with LCD display on, and battery pack being charged.)
External dimensions (W x D x H) Approx.188 x 117 x 42 mm (excluding projections)
Weight Approx. 500 g (excludes AC adapter and battery pack)

GL260 ANALOG INPUT SPECIFICATIONS

Item Description
Type of input terminal M3 screw type terminals (Rectangular flat washer)
Input method Photo MOS relay scanning system
All channels isolated, balanced input
Measurement range Voltage 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 100 V, 1-5 V F.S.
Thermocouple K, J, E, T, R, S, B, N, C (W: WRe5-26)
Humidity 0 to 100% (voltage 0 to 1 V scaling conversion) – using the humidity sensor (option B-530)
Filter Off, 2, 5, 10, 20, 40 (moving average in selected number)
A/D converter Sigma-Delta type, 16 bits (effective resolution: 1/40000 of the measuring full range)
Maximum
input voltage 		Between
+/– terminals 		20 mV to 1 V range: 60 Vp-p,
2 V to 100 V range: 110 Vp-p
Between
input terminal / input terminal 		60 Vp-p
Between
input terminal / GND 		60 Vp-p

Software Specifications for PC

Item Description
Model name GL28-APS
Supported OS Windows 11 (64bit) / 10 (64bit/32bit)
Functions Control the GL series, Real-time data capture, and Data format conversion
Number of groups Up to 4 groups
Number of CHs per 1 group Up to number of connected module
Maximum number of channels 1000 ch maximum
Settings control AMP settings, capture settings, trigger/alarm settings, report settings, others
Capturing data Real-time data (CSV, GBD Binary)
Data in Internal memory or SD memory card (CSV, GBD binary)
Display Analog waveforms, logic waveforms, pulse waveforms, digital values
Display modes Y-T View, Digital View, X-Y View between Cursors (only during replay)
File conversion Between cursors, All data
Monitor functions Alarm monitor enables sending of email to the specified address
Statistic/History Displays maximum, minimum and average values during measurement
Report function Enables creation of daily or monthly files

WIRELESS LAN UNIT Specifications

Item Description
Model number B-568
Communication method Wireless communication (using radio waves in the 2.4GHz band)
Installation Attach to the wireless LAN connection terminal
* When the wireless unit is inserted, the SD memory card cannot be inserted into the SD CARD slot.
Wireless LAN standard IEEE802.11b/g/n
Function Control from PC, data transfer to PC, control and data transfer from smartphone/tablet

• For access point: Local control and transfer are possible.

• For station: In addition to local, remote control and transfer using G-REMOTE is also possible.

Communication range: Approx. 40 m
* Communication range depends on the obstacles and the surrounding environmental conditions.

WPS: Push button method / PIN method

Encryption function: WEP64, WEP128, WPA-PSK/WPA 2-PSK (TKIP/AES)
* WPA/WPA2 and TKIP/AES are automatically selected.

Humidity Sensor B-530 (option) Specifications

Item Description
Allowable temperature range -25 to 80℃
Allowable humidity range 0 to 100％ RH
Relative humidity measurement accuracy ±3％ RH（5 to 98％ RH at 25℃）
Method Capacitance method
Relative humidity measurement accuracy (5 to 98%) Measurement environment Measurement accuracy
0 to 10℃ ±5％ RH
10 to 20℃ ±4％ RH
20 to 30℃ ±3％ RH
30 to 40℃ ±4％ RH
40 to 50℃ ±5％ RH
50 to 60℃ ±6％ RH
60 to 70℃ ±7％ RH
70 to 80℃ ±8％ RH
* Measurement accuracy at 60℃ or more is a reference value.
Response time 15 sec. (90% response when membrance filter is installed)
Sensor output 0 to 1 VDC
External dimensions Φ14 x 80 mm (excluding cable)
Cable length 3 ｍ
Sensor power source DC + 5 to +16 V
Power consumption approx. 4 mA